One of the most important things to consider when using a T-Rex miner is your computer’s configuration. Although the T-Rex webUI provides read-only access to mining statistics and rig configuration, updating these settings will require a password. For best results, use a long password between eight and 64 characters that contain lowercase and uppercase letters. In Windows, you can do this by opening a command prompt under Administrator.
To set the default value, go to the “hashrate-avr” tab. Then, press Enter. This will give you the current average hashrate for T-Rex. By default, the maximum hashrate is 30 minutes. To fix this problem, manually enter 60 in the hashrate-avr field of the flight sheet. However, the HiveOS team is working on a permanent fix for this problem.
If you’ve forgotten the password for your T-Rex, you can redownload the software. In dual mode, you will be able to view the same stats for both algos, but your WebUI won’t reflect the second algo. This is normal. You can also use the “-lhr-tune” feature to change the default value for a single algo.
Once you’ve done this, you’ll be able to use the T-Rex. Then, install the latest version of HiveOS and trex miner github. Once you’ve installed it, follow the directions on the screen. If you’ve already downloaded the latest version, it’s best to run a check before you start mining. The T-Rex has an API key that has a variable value.
While you’re downloading the T-Rex miner, you should first make sure your computer has enough RAM. If your machine is not getting enough power to run multiple algos, you should try redownloading the software. This way, you’ll ensure that you’ll have enough RAM to run both the algos. This will prevent your T-Rex from crashing. If you’re not getting enough power, it’s best to run it in dual mode.
Having a stable hashrate is very important for mining. If you’re not getting the desired result, try reinstalling the software. Once you’ve done this, make sure you’re using the most recent version of the T-Rex. The updated version should be compatible with your computer. You’ll also need to install a TREX miner for this. It’s not a good idea to use this version if your device doesn’t support HiveOS.
During the installation of the T-Rex, you must enter the password that you’d like to use. If you’ve changed your mind, you can redownload the new version. But if you’re using a T-Rex, the default password is trex miner-github-cmd. The default password is trezx-miner-cmd-github-github-cmd.org. The T-Rex doesn’t support this protocol because it requires a POS client.
While running the T-Rex, you need to make sure that you have the right hashrate for your T-Rex. When you’re mining with it, the hashrate will fluctuate, so make sure that you set the minimum and maximum hashrates accordingly. Then, you need to reinstall the T-Rex. Its github config file will store the default value of the T-Rex.
After installing T-Rex, you should also reinstall the TRex miner github. trex miners tend to use the same configuration files. To avoid problems with the T-Rex, you can set the hashrate for each algo separately. Then, you can add a new IP address and run the T-Rex as an ESP32.
To use LHR, you can also adjust the GPU’s voltage. If it’s too high, the GPU can’t handle the power. To fix this, you need to increase the voltage of the GPU. A higher GPU will increase the amount of electricity needed to run the miner. But if you want to use it on the cloud, you must be sure that you have sufficient virtual memory. This can help you to run the TREX miner on a server with low power consumption.